Delock Riser Card PCI Express x1 > x16 with 60 cm USB cable

Kuvaus

DeLOCK Riser card PCI Express x1> x16 with 60 cm USB cable, black

The PCI Express riser card from Delock can be connected to any PCI Express x1 input on the motherboard. Then the x16 PCI Express input can be mounted in another position in the housing. This makes it possible to connect a graphics card to each PCIe input on the motherboard, even if the graphics card is wider than a single input. By using several riser cards, several graphics cards can be used simultaneously on one motherboard, e.g. for handling cryptocurrencies such as Bitcoin, Ethereum or Zcash.

Note
The package contains a USB 3.0 riser cable with a length of 60 cm. No USB signals are transmitted via this cable, so it is not possible to replace it with another or longer cable.

Special features
A PCIe x16 graphics card can be used with a PCIe x1 input.

Specifications
• Connection:
  Motherboard side:
    1 x PCI Express x1
    1 x USB 3.0 Typ-A female
  Risersidan:
    1 x PCI Express x16
    1 x USB 3.0 Typ-A female
    1 x 6-pin PCIe power supply, female
• Data transfer speed up to 800 MB / s
• 4 x FP solid capacitors, ensures secure power supply to the graphics card
• 4 x mounting holes on the riser board
• Underside with insulation, cushion with anti-slip
• Cable data:
  1 x riser cable USB 3.0 Type-A male to male, approx. 60 cm (incl. Connector)
  1 x 6-pin power cable to SATA, approx. 20 cm (incl. Connector)
• Riser card dimensions (LxWxH): approx. 128.25 x 43.50 x 21.20 mm
• Independent of operating system, no driver installation required

System requirements
• PC with a free PCI Express x1 / x4 / x8 / x16 / x32 slot
• Power supply with a free SATA power connection

Package contents
• PCIe to USB riser card
• USB to PCIe riser card
• USB 3.0 cable
• Power cord

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.