2.5″ SATA SSD/HDD to PCIe 2.0 x 1 Hot-Swap Mobile Rack, Black



Noutopisteessä 0 kpl
Heti toimitettavissa 0 kpl
Toimitusaika Tilaustuote, 2-4 viikkoa


Tuotekoodi MB839SP-B
Valmistaja ICY DOCK
Maksa erissä keskimäärin noin 5,20 /kk
(Joustava erämaksu, 23 kuukauden maksuajalla KLARNA erämaksulla)
Luoton kokonaiskustannus 120,10 - Lue lisää


ICY DOCK ToughArmor MB839SP-B, 2.5” SATA SSD/HDD to PCIe 2.0 x1 Hot-Swap Mobile Rack for PCIe Expansion Slots, black

Introducing the ToughArmor MB839SP-B rugged removable drive bay for 2.5” SATA hard drives and SSDs (9.5mm height). Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, the MB839SP-B gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there’s no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray.

• Compatible with Mac Pro 2008-2012 models with no driver required
• Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height
• Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots
• Installs into single-width PCIe expansion slot
• PCIe interface provides both power and data transfer which ultimately reduce cable clutter
• Narrow design allows for multiple bays to be installed side-by-side in a modular design
• Includes full-height PCIe faceplate to protect against buildup of dust
• Strong hot-swap connector rated for a minimum of 10,000 insertion/removal cycles
• Eagle-hook lock system keeps the drive secure in the enclosure
• EMI Grounding – protects hard drives from electrical damage
• Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage
• Active Power Technology (APT) saves power by shutting the device down when no drive is installed.
• Industry leading 3-year warranty against all defects
• Complimentary support from professionally trained US-based technical support agents

Product Dimensions (WxHxD): 154x122x22mm


Paino 0.28 kg




Tuotearvioita ei vielä ole.

Kirjoita ensimmäinen arvio tuotteelle “2.5″ SATA SSD/HDD to PCIe 2.0 x 1 Hot-Swap Mobile Rack, Black”